For general laboratory use. Instrument FLOW PCR Setup GLU FLOW PCR Setup Instrument INS_4106 07101996001 FLOW PCR Setup Instrument FLOW PCR Setup Instrument 04038377028941 Instruments 1 instrument Not Available The FLOW PCR Setup Instrument (PSU) is a benchtop robotic workstation for fully automated PCR reaction mix setup and distribution into PCR plates from individual components or ready to use reagents. The FLOW PCR Setup Instrument includes automated tracking of barcoded accessories and consumables. The hardware is designed for aspirating and dispensing volumes up to 1 ml.The FLOW Primary Sample Handling Software can be installed and executed on the FLOW PCR Setup System. This supports a new FLOW Solution configuration, FLOW Flex, with primary sample handling and PCR setup enabled on the same system. The FLOW Primary Sample Handling and MagNA Pure 96 System workflow can also be established using a FLOW PCR Setup Instrument in primary sample handling mode.When using this FLOW Flex or FLOW PSH on PSU Standalone configuration, please follow the instructions in the FLOW Primary Sample Handling System Operator's Guide for primary sample handling on the FLOW PCR Setup System. The technical specifications of the FLOW Primary Sample Handling System also apply to the FLOW PCR Setup System when operated in primary sample handling mode. en PSU is a pipetting sample handling instrument based on the Hamilton STARlet en General specifications Instrument typeBenchtop standalone instrumentDimensions112.4 × 90.3 × 100.6 cm (W×H×D); depth without autoload 79.5 cmWeight180 kg (178 kg/m²)Power supply115 VAC to 230 VAC (+/-10%)Frequency50/60 Hz +/- 5%Power consumption600 VANoise level< 65 dB (A) (according to EN27779)Installation/overvoltage category (IEC 61010-1)IIElectromagnetic emissionClass BHeat output during run (mean value)Approximately 2160 BTU/hPollution degree2Delayed action fuse115 V: 6.3 A (T6.3AL250) / 230 V: 3.15 A (T3.15L250) en